AN-50 with electric motor
From 850,000 ₽
In stock
Pumping unit AN-50 is designed for injection of flushing fluid during drilling of oil and gas wells; for injection of water into the reservoir during intensification of oil production; for pumping of various non-aggressive liquids, including watered oil.
Clay solution or water can be used as a flushing or pumping liquid. The content of mechanical impurities (sand, solid particles of drilled rock) should be no more than 1% by volume with hardness up to 1200 HV units.
Type of climatic execution - U1, placement category 2 according to GOST 15150-69.
Power supply system - three-phase alternating current network with nominal voltage 380 V, frequency 50 Hz. Electricity quality standards according to GOST 31309-98.
Composition:
- frame;
- piston pump;
- electric motor;
- V-belt transmission;
- V-belt transmission guard.
The pump transmission shaft is driven by an explosion-proof electric motor via a V-belt transmission. The piston pump is bolted to the machine frame. The electric motor is mounted on a plate, which is secured to the machine frame with bolts. The frame of the unit has slots for the mounting bolts of the motor plate for adjusting the tension of the V-belt transmission belts.
Technical specifications of AN-50 Pump
|
Pump labelling |
Power output, kW |
Diameter of replaceable bushings, mm |
Volume flow, l/sec (l/min) |
Top pressure, MPa |
Number of double piston strokes per min. |
|
AN 50 |
50 |
90 |
5,8(348) |
6,3 |
105 |
|
100 |
7,3(438) |
5,0 |
|||
|
110 |
9,0 (540) |
4,1 |
|||
|
120 |
11,0 (660) |
3,4 |
Structural designs of pump units
|
Unit design |
АN50.00.00.000 |
-01 |
-02 |
-03 |
-04 |
| Diameter of replaceable bushings, mm | 90 | 120 | 120 | 120 | 120 |
| Motor power, M.kW | 45 | 45 | 45 | 55 | 55 |
| Maximum flow rate, l/sec (l/min) | 5,8(348) | 11(660) | 11(660 | 11(660) | 11(660) |
| Maximum pressure, MPa | 5,4 | 5,4 | 5,4 | 6,3 | 6,3 |
| Pulley position | right | right | left | right | left |
