Cementing unit ANP-320 on KamAZ chassis
From 9 800 000 ₽
In stock
Purpose
Pumping unit UNBP-125x32 (ANP-320) without water supply unit (pressing unit) is designed for injection of various non-aggressive media into wells in the process of their routine and workover maintenance.
Composition
- assembly base;
- high-pressure pump;
- manifold.
Pumping units UNBP-125x32 (ANP-320)
The units are equipped with a heating device for the hydraulic part of high-pressure pumps to ensure operation of the units at low temperatures. The units are equipped with a system for monitoring the oil temperature in the crankcase of the cementing pump NC-320 with information output on the vehicle dashboard.
Equipped with a manifold for simultaneous operation of several units during well cementing and a Ø50 mm adapter for connection to the suction hose receiving line.
A separate delivery of a set of mounted (deck) equipment of pumping unit UNBP-125х32 or equipment installation on the customer's transport base is provided.
Technical specifications
| Assembly base | KamAZ-43118 |
| Power drive | vehicle engine (base) |
| Drawdown power, not more, kW | 176 |
| High-pressure pump | NC-320 |
| Useful power, kW | 100 |
| Maximum discharge pressure, MPa | 40 |
| Highest ideal flow rate, l/sec (l/min) | 26 (1560) |
| Capacity of measuring tank, m3 | 6 |
| Manifold conditional diameter, mm: | |
| — receiver line | 100 |
| — discharge line | 50 |
| Cement mortar tank capacity, m3 | 0,25 |
| Overall dimensions, mm | 10150х2700х3225 |
